![background image](http://html.mh-extra.com/html/kramer/kt-107s/kt-107s_user-manual_2002364009.webp)
Kramer Electronics Ltd.
KT
‑
107S
– Defining the KT
‑
107S
7
KT
‑
107S On-Wall Mount
This section defines the
KT
‑
107S on-wall mount
.
Figure 4:
KT
‑
107S
Touch Panel
Front Panel
#
Feature
Function
Groove (x4)
For hanging the panel mount plate (attached to
KT
‑
107S
) on a wall.
Flat Cable Connector
Connect to the rear side of the
KT
‑
107S
using the supplied flat cable
.
Passes the Ethernet signal and power to the
KT
‑
107S
.
Screw Opening (x8)
For attaching the on-wall mount unit to a standard in-wall junction box
(various holes fit different standard in-wall junction boxes), see
Mounting the KT
‑
107S on a Wall
on page
12
.
Unit Cable Opening
Pass the supplied right-angle OTG USB cable through the opening to
connect to the rear side of the
KT
‑
107S.
Indication Arrows
Top side up; shows the correct direction for mounting the on-wall mount
unit and for hanging the
Touch Panel
.
Screw Opening (x2)
For attaching the on-wall mount unit to a standard in-wall junction box
(various holes fit different standard in-wall junction boxes.
Indication Arrows
Top side up; shows the correct direction for hanging the panel mount
plate.
Plate Cable Opening
Fits the opening on the on-wall mount unit. Pass the right-angle OTG
USB cable through the opening to connect to the rear side of the
KT
‑
107S.
Screw Opening (x4)
Attach the
KT
‑
107S
to the panel mount plate using the supplied screws.
Cable Opening
Pass the cables through the opening to connect to the rear side of the
KT
‑
107S.
Tab (x4)
For hanging the
KT
‑
107S
with the attached panel mount plate on the
on-wall mount unit.