Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Operating and Controlling KDS-EN7
13
▪
HDMI status, including video input resolution and HDCP settings status.
▪
View the encoder channel that was selected.
▪
Device internal temperature (°C).
Device status is viewed.
Viewing Device Information
To view device parameters:
1. Press the left or right arrows to access the device status menu.
2. Press the up or down arrows to view the device firmware and hardware information:
▪
Firmware version.
▪
Bootloader information.
▪
Hardware version.
Device information is viewed.
Selecting the video input signal
You can either select the streaming input or the local HDMI input signal to route to the HDMI
output.
To select the streaming input:
1. Press the left or right arrows to access the device setting menu.
2. Press the up or down arrows to select Input Setting.
3. Select one of the HDMI inputs:
▪
STREAM IN
▪
HDMI IN
4. Press
Enter
to accept change.
The input is selected.
Defining Output Resolution
Select the display resolution.
To select the output resolution:
1. Press the left or right arrows to access the Device Settings menu.
2. Press the up or down arrows to select RESOLUTION Setting:
▪
Pass-through
▪
720P60
▪
1080P60
▪
1080P50
▪
2160P25
▪
2160P30