![background image](http://html1.mh-extra.com/html/kramer/kds-dec7/kds-dec7_user-manual_2001587092.webp)
Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Protocol 3000
89
Function
Description
Syntax
Response
Parameters/Attributes
Example
KDS-GW-ETH
Set gateway network
port
#KDS-GW-ETH
gw_type,netw_id
<CR>
~nn@KDS-GW-ETH
gw_type,netw_id
<CR><LF>
gw_type
{
0
– Control
1
– Dante
}
netw_id
– Network ID–the device
network interface (if there are more
than one). Counting is 0 based,
meaning the control port is ‘0’,
additional ports are 1,2,3….
Set Dante port to eth1
#KDS-GW-ETH 1,1
<CR>
KDS-GW-
ETH?
Get gateway network
port.
#KDS-GW-ETH? gw_type
<CR>
~nn@KDS-GW-ETH
gw_type,netw_id
<CR><LF>
gw_type
{
0
– Control
1
– Dante
}
netw_id
– Network ID–the device
network interface (if there are more
than one). Counting is 0 based,
meaning the control port is ‘0’,
additional ports are 1,2,3….
Get Dante port
#KDS-GW-ETH? 1
<CR>
KDS-IR-GW
Set IR gateway
mode.
#KDS-IR-GW mode
<CR>
~nn@KDS-IR-GW
mode
<CR><LF>
Ir gw mode
{
0
– off
1
– on
}
Set IR Gateway to ON
#KDS-IR-GW 1
<CR>
KDS-IR-GW?
Get IR gateway
mode.
#KDS-IR-GW?
<CR>
~nn@KDS-IR-GW
mode
<CR><LF>
Ir gw mode
{
0
– off
1
– on
}
Get IR Gateway
#KDS-IR-GW?
<CR>
KDS-
METHOD
Set unicast /
multicast .Add Set
Command; add
Multicast
#KDS-METHOD 1
<CR>
~nn@KDS-METHOD
method
<CR><LF>
method
– Streaming method – 1
Unicast
2 Multicast
Set current streaming method
of encoder/decoder:
#KDS-METHOD 1
<CR>
KDS-
METHOD?
Get unicast /
multicast. Add
Multicast.
#KDS-METHOD?
<CR>
~nn@KDS-METHOD
method
<CR><LF>
method
– Streaming method
1
– Unicast
2
– Multicast
Get current streaming
method of encoder/decoder:
#KDS-METHOD
<CR>
KDS-
MULTICAST
Set multicast group
address and TTL
value.
#KDS-MULTICAST
group_ip,ttl
<CR>
~nn@KDS-MULTICAST
group_ip,ttl
<CR><LF>
group-ip - Multicast group IP used
for streaming packets in Multicast
Streaming Method.
ttl - Time to Live of the streamed
packets.
Set multicast group adress
and TTL value
#KDS-MULTICAST
225.225.0.10,1
<CR>
KDS-OSD-
DISPLAY
Set decoder OSD
display.
#KDS-OSD-DISPLAY mode
<CR>
~nn@KDS-OSD_DISPLAY
mode
<CR><LF>
osd mode
{
0
– off
1
– on
2
– display now + on; //set osd
mode to on, and osd will display
now
}
Set OSD Display mode on
#KDS-OSD-DISPLAY 1
<CR>
KDS-OSD-
DISPLAY?
Get decoder OSD
display status.
#KDS-OSD-DISPLAY?
<CR>
~nn@KDS-OSD_DISPLAY
mode
<CR><LF>
osd mode
{
0
– off
1
– on
}
Get OSD display mode
#KDS-OSD-DISPLAY?
<CR>
KDS-RATIO?
Get aspect ratio.
#KDS-RATIO?
<CR>
~nn@KDS-RATIO
value
<CR><LF>
value
– Streamer Decoder Aspect
Ratio
width:height, for example “16:9”
Get Aspect Ratio
#KDS-RATIO?
<CR>