![background image](http://html1.mh-extra.com/html/kramer/kds-dec7/kds-dec7_user-manual_2001587106.webp)
Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Protocol 3000
103
Function
Description
Syntax
Response
Parameters/Attributes
Example
X-ROUTE?
Get routing status.
NOTE:
It is
recommended to use
the command
#SIGNALS-LIST to
get the list of all
signal IDs available
in the system and
which can be used in
this command.
VIDEO.1 are the
default
<signal_type> and
<index> in this
command and are
implied even if not
written:
#X-ROUTE
out.sdi.5,in.sdi.1
<CR
>
is interpreted as:
#X-ROUTE
out.sdi.5.video.1,in.s
di.1.video.1
<CR>
This is an Extended
Protocol 3000
command.
#X-ROUTE?
<direction_type1>.<port_type1>.<po
rt_index1>.<signal_type1>.<index1>
<CR>
~nn@X-ROUTE
<direction_type1>.<port_type1
>.<port_index1>.<signal_type1
>.<index1>,<direction_type2>.
<port_type2>.<port_index2>.<s
ignal_type2>.<index2>
<CR><L
F>
The following attributes comprise
the signal ID:
<direction_type>
– Direction of the
port:
IN
– Input
OUT
– Output
BOTH
– Bi-directional (e.g. for RS-
232)
<port_format>
– Type of signal on
the port:
HDMI
HDBT
ANALOG_AUDIO
AMPLIFIED_AUDIO
TOS
SPDIF
MIC
RS-232
IR
USB_A
USB_B
USB_C
<port_index>
– The port number as
printed on the front or rear panel
<signal_type>
– Signal ID attribute:
VIDEO
AUDIO
ARC
RS232
IR
USB
AV_TEST_PATTERN
<index>
– Indicates a specific
channel number when there are
multiple channels of the same type
Get the routing status:
#X-ROUTE?
out.hdmi.5.video.1
<CR>