Kramer Electronics Ltd.
KDS-EN7, KDS-DEC7
– Operating and Controlling KDS-EN7
12
3. Select the EDID from the following options:
Select
EDID Setting
0
Default
1
4K30_2.0CH
2
4K30_Dolby
3
1080P50_Dolby
4
720P50_2.0
5
720P50_Dolby
4. Press
Enter
to accept change.
EDID on the input is set.
Defining HDCP Settings
Enable or disable HDCP on the input via the navigation buttons.
To define HDCP settings:
1. Press the left or right arrows to access the HDCP Settings menu.
2. Press the up or down arrows to select HDCP support mode:
▪
Select ON to enable HDCP support.
▪
Select OFF to disable HDCP support.
3. Press
Enter
to accept HDCP mode.
Defining Encoder Device Channel Number
Set a device channel number from 1 to 999.
To define the encoder channel number:
1. Press the left or right arrows to access the CH DEFINE menu.
2. Press the up or down arrows to set a first digit (0 to 9).
3. Press left and right arrows to add another digit (0 to 9).
4. Press
Enter
to accept channel number.
Channel number for this device is defined.
Using KDS-DEC7 Navigation Buttons
Defining Device Status
You can view the device parameters.
To view device parameters:
1. Press the left or right arrows to access the device status menu.
2. Press the up or down arrows to view the following information:
▪
LAN 1 status, including IP address, Subnet mask and Gateway address
▪
LAN2 status, including IP address, Subnet mask and Gateway address.
