Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
34
To create a group:
1. In the Menu tabs, select
Settings
. The Group page appears.
Figure 22: Settings Tab
– Group Page
2. Click
to create a new group.
Click
to edit an existing group.
Click
to delete a group
3. Enter group details:
▪
Next to Order, open the drop-down box to select the group order (also use to change
the order of existing groups).
Groups are displayed in the Monitor & Control tab in the same order.
▪
Enter Group Name.
▪
Select Group Type from the drop-down list. Group type determines the signal type for
this group: Video/Audio, USB, and IR/RS-232.
This selection affects the type of receiver endpoints available within the Device List.
▪
In the Device area, which lists all the available decoder acceptors (displays), click an
acceptor to move it to the Group area, which lists all the acceptors in the selected
group. Click
All
to move all the devices to the group.
▪
In the Group area, which lists the devices in the group, click a device button to
remove it from the group (back to the Device area) or click
Remove All
to remove all
of them.
4. Click
Save Group
.
A group is saved to the list.
