Kramer KDS-8-MNGR User Manual Download Page 48

Page: 48 / 72

Kramer Electronics Ltd.

KDS-8-MNGR

– Using Embedded Web Pages

Note that not all SDVoE devices support the Hello feature. Hello buttons are
highlighted for devices that support this feature.

▪

Under Icon, view the status of the encoder (connected or disconnected).

If an encoder stream requires more bandwidth than is available, a warning icon
(

) is displayed instead of the normal source icon. The video output from a source

displaying this icon may become visually unstable. We recommend that you lower
the resolution or the framerate of the stream.

▪

Under Order, define the order of the encoders in the list via drop-down box.
Changing the order here also changes the

units’ list order in other tabs.

▪

Under Name, view the name of each source encoder device. Change the device
name via Device pop-up window (see below).

▪

Under IP Address, view the encoder IP address.

▪

Under Video, Click

Info

to view video source information via the pop-up display

window. If no live source is present, Info button appears red.

▪

Under Network, click

Settings

to view and change Network settings via the Network

pop-up window. Click

Save

to accept changes and exit window.

▪

Under RS-232, click

Settings

to view and change RS-232 settings via the RS-232

pop-up window. Click

Save

to accept changes and exit window.

▪

Under

Device

, click

Settings

to view and change device settings via the device pop-

up window. Select a System Command to the unit (such as factory reset, Reboot the
unit, firmware update and transform transceiver to receiver), change the device
name, and so on. Click

Save

to accept changes and exit window.

Figure 38: Transmitter Page

– Device Settings

▪

Under USB, click

Settings

to view and change USB settings via the USB pop-up

window. Click

Save

to accept changes and exit window.

USB functionality is not supported by all SDVoE units.

Encoder Settings are configured.

Summary of Contents for KDS-8-MNGR









































































Search results

Summary of Contents for KDS-8-MNGR

Reviews:

Related manuals for KDS-8-MNGR

Brands by name

Popular brands

Kramer KDS-8-MNGR, User Manual

Search results

Summary of Contents for KDS-8-MNGR

Reviews:

Related manuals for KDS-8-MNGR

Brands by name

Popular brands