Kramer Electronics Ltd.
KDS-8-MNGR
– Using Embedded Web Pages
52
To configure multiview features:
1. In the Menu tabs, select
Multiview
. The Multiview page appears.
Figure 43: Multiview Page
2. Click
to create a new Multiview preset.
Click
to edit an existing Multiview preset.
Click
to delete a preset
Deleting a Multiview preset that is currently active, does not disable the Multiview
output. To remove a multiview output, route a new source to that output or disable
the output from the Monitor & Control tab (see
Monitoring and Controlling Decoders
3. Enter Preset details:
▪
Next to Order, open the drop-down box to select the Multiview preset order (also use
to change the order of existing groups).
Multiview presets are displayed in other tabs in the same order.
▪
Enter Multiview Preset Name.
▪
Select the decoder display to output Multiview preset.
▪
Select the resolution for the decoder Multiview output.
▪
Select the Aspect Ratio to use when presenting the sources in the Multiview
windows. Selecting
Best Fit
maintains the aspect ratio of the original source while
filling the video wall as much as possible and adding black bars where necessary.
Selecting
Full Screen
stretches the source to fit the video wall, regardless of the
original source’s aspect ratio.
This setting applies to all sources/windows within the current Multiview preset.
