Kramer KDS-8-MNGR User Manual Download | Manualshive

Page: 20 / 72

background image

Kramer Electronics Ltd.

KDS-8-MNGR

– Using Embedded Web Pages

18

To assign a source to a video wall group:

1. In the Menu tabs, select Monitor & Control. The Video section appears.

2. Click

Video wall

. The Video Wall section appears.

Figure 12: Monitor & Control Tab

– Video Wall Page

3. Drag a source from the Transmitter area to the required video wall group.

The source on the encoder is streamed to the Video Wall.

Dragging a source to an inactive video wall group, automatically activates all of that video wall
displays.

Routing a Multi-viewer

Set the streaming in a multi-viewer by dragging and dropping the Multiview preset to an
available decoder display and also by dragging and dropping a decoder source over to
Multiview windows.

Before routing inputs to Multiview windows, you need to define a Multiview preset
(see

Configuring Multiviews

on page

The Multiview page includes four main areas. The:

•

Preset

area, which includes all currently defined multiview presets.

•

Receiver

area, which includes all the decoder displays that available to display the

muliview preset.

•

Multiviewer view

area, which shows a simplified graphical representation of the

currently selected multiview preset. An active preset appears has green windows that
show a faded video thumbnail of the source that is currently selected.

•

Transmitter

area, which includes all the encoder sources. Unavailable sources are

displayed in red.

«
...
18
19
20
21
22
...
»

Summary of Contents for KDS-8-MNGR









































































Reviews:

No comments

Related manuals for KDS-8-MNGR

Brand: AIC Pages: 112

Brand: IBM Pages: 16

Brand: QNAP Pages: 203

Brand: Axis Pages: 129

Brand: Octagon Pages: 17

Brand: Black Box Pages: 2

Brand: Black Box Pages: 60

PROXYSERVER MTPSR1-120

Brand: Multitech Pages: 110

ProxyServer MTPSR3-200

Brand: Multitech Pages: 130

Brand: Intel Pages: 31

Brand: Intel Pages: 75

Brand: Seagate Pages: 69

Brand: Planet Pages: 76

Brand: ClearCube Pages: 2

Brand: Xblue Networks Pages: 17

PowerStore Series

Brand: Dell EMC Pages: 22

A+ AS-1114S-WTRT

Brand: Supermicro Pages: 131

Brand: Supermicro Pages: 124

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands