![background image](http://html.mh-extra.com/html/kramer/kads-1/kads-1_user-manual_2002091040.webp)
32
KADS-100/KADS-1/KADS-2 - Operating the KADS-100
#
Item
Description
7
TCP
Port
Enter the TCP port or use the spinner buttons to adjust the
value and press Set to save
8
UDP
Port
Enter the UDP port or use the spinner buttons to adjust the
value and press Set to save
9
BROWSE…
Button
Press to browse to a new firmware version file.
Note
: Only the .kfw file format is supported
10
Start Upgrade
Press after selecting a new firmware version file to start the
upgrade procedure
11
FACTORY RESET
Button
Press to reset the device to factory default parameters
To upgrade the firmware:
1. Click the Browse button.
The Windows Browser opens.
2. Browse to the required file.
3. Select the required file and click Open.
The firmware file name is displayed in the Firmware Upgrade page.
4. Click Start Upgrade.
The firmware file is loaded and a progress bar is displayed.
Do not interrupt the process or the
KADS-100
may be damaged.
5. When the process is complete, reboot the device.
The firmware is upgraded.
To reset the KADS-100 to factory default parameters:
1. Click the Factory Reset button.
The confirmation message is displayed.
2. Click OK to continue or Cancel to exit the procedure.
3. Click OK.
The progress message is displayed.
On completion, the success message is displayed.
4. Click OK.