14
KADS-100/KADS-1/KADS-2 - Connecting the KADS-100, KADS-1 and KADS-2
6.1
Installing the Ferrite Rings
Figure 6: Looping the Cable through the Ferrite Ring
To install a ferrite ring on the output of the KADS-100:
1. Open the plastic cover of the ferrite ring by disengaging the clips with a
small screwdriver.
2. Feed the audio output cable from the
KADS-100
through the ring.
3. Form a small loop in the cable and feed it through the ring again.
4. Close the ring to secure the loop inside the ring.
To install a ferrite ring on the input to each speaker:
1. Open the plastic cover of the ferrite ring by disengaging the clips with a
small screwdriver.
2. Feed the audio input cable to the
KADS-1/KADS-2
through the ring.
3. Form a small loop in the cable and feed it through the ring again.
4. Form a second small loop in the cable and feed it through the ring again.
5. Close the ring to secure the loops inside the ring.
