Kramer KADS-1, User Manual

Page: 30 / 73

22 KADS-100/KADS-1/KADS-2 - Operating the KADS-100
Menu Item Level One Level Two Level Three
Channel Setup Channel ID 1 to 8 Select Input:
analog, file, Spdif,
test tone
Channel Volume (db)
–80 to +20
Mic Talk Over (ducking) Yes, No
File Mode Stereo, Mono
Spdif Mode Stereo, Mono
Test Sine Frequency
(Hz) 0 to 20000
8.3 Operating the KADS-100 Using the Web Pages
The KADS-100 can be operated remotely using the embedded Web pages. The
Web pages are accessed using a Web browser and an Ethernet connection.
Before attempting to connect:

Ensure that your browser is supported (see Section
10
)

Ensure that JavaScript is enabled
Note : Connecting to the KADS-100 via more than one Web browser at a time can
lead to unpredictable behavior.
8.3.1 Browsing the KADS-100 Web Pages
Note : In the event that a Web page does not update correctly, clear your Web
browser’s cache by pressing CTRL+F5.
To browse the KADS-100 Web pages:
1. Open your Internet browser.
2. Type the IP number of the device, (see Section
10.1
) in the Address bar of
your browser.
Note : If authentication is enabled, (see Section
8.3.5
) the following window
appears ( Figure 9 ) and you must enter the valid username and password to
access the Web pages. For default authentication details, see Section
10.2
.