Kramer KADS-1, User Manual

Page: 27 / 73

KADS-100/KADS-1/KADS-2 - Operating the KADS-100 19
19
2. Select Speaker Setup using the rotary knob.
3. Press Enter.
The selected Speaker button lights red and the LED on the speaker lights.
4. Enter the number of the speaker to control using the Keypad 1 to 9 and 0
buttons, for example, press 2 and 8 for speaker 28. The selected speaker
number is displayed on the LCD.
5. Press the Enter button.
Use the menu options to configure the speaker, (see Section
8.2
).
8.1.3 Setting the Microphone Gain and Delay
To set the microphone gain and delay:
1. Press the Mic button on the front panel.
The Mic button lights red.
2. Use the menu options to set the microphone gain and delay, (see
Section
8.2
).
8.1.4 Setting the Volume, Bass, Mid, and Treble Audio Properties
Note : The following procedure sets the audio properties for the speaker that was
last selected unless another speaker is first selected, (see Section
8.1.2
). If no
speaker has been selected yet, the procedure will set the audio properties for
speaker 1.
To set the audio properties :
1. Press either the Volume, Mid, Bass, or Treble button on the front panel.
The selected button lights red and the current level for the selected audio
property is displayed on the LCD.
2. Use the menu options to set the level for the selected audio property, (see
Section
8.2
).