Servos
In this type of plane it is important to use strong, fast and light micro servos especially the ones
used in the wing. I opted for Hitec HS-65hb. It is an analog servo with karbonite gears.
Rudder has pull pull system as shown on the pictures above.
All the linkages except for the rudder use 2x1mm carbon tube glued into threaded couplers and
screwed into metal clevises.
Settings and flying
Throws
Use maximal possible throws on ailerons and rudder. Movement of horizontal stabilizer is limited
by rudder linkage cord.
CG
73 mm – 84 mm from wing leading edge measured next to the wing root.
I recommend to use 74 mm for first flight. Setting your CG exactly is very important!