Fuselage step 2
Part canopy_f has printing support which should be removed (two triangle shaped legs). This
canopy provides service access to the motor and should NOT be glued to the fuse_1 part.
Glue together canopy_middle_0 and canopy_middle_1. These two parts work as cockpit canopy
and provide service access to the servos.
When assembling landing gear, consider using some kind of spacer if your wheels are narrow and
have too much space in shoe. It is enough to secure wheel_shaft_23 to the shoe only from one
(outer) side with the glue. First attach landing leg spars to the shoe_L part and only then attach the
landing gear to the fuselage.
Insert and center wing_joiner_rod_4_300 into holes in fuse_2 and wing_joiner_rod_4_280 into
holes in fuse_3. Glue it in the place from inner side of the fuselage.
Glue tail_leg_spar_2x1_80 to the fuse_9 part.
Finally insert fuse_servo_plate_spar_back_2x1_51 from right side of the fuselage and lead it
through hole in servo plate. Fix it in place with glue.