KPWL-0300 User's Manual
4
1.2 Warnings
Do not use the device in very damp locations. Do not allow it to become wet or touch it with anything that is wet.
Do not install the device in a location that is always hot.
Do not install it in an electronic product or near a device that is expected to generate heat.
Install cables and connectors so they do not cross over cables from other devices and do not get wet.
Do not modify, disassemble, or repair the device yourself.
If you notice any unusual sounds, smells, or smoke, promptly unplug the device's power plug separate it from
peripheral devices and turn off the power.
Do not drop the device or subject it to extreme shock. If it is dropped or subjected to extreme shock, promptly
unplug its power plug.
If liquid or foreign matter gets inside the device, promptly unplug its power plug.
Regarding the AC adapter
1.
Do not modify, overheat, or repair it.
2.
Do not install it between walls or shelves.
3.
Do not stretch it or place heavy weights on it.
4.
Do not overheat it by bringing hot tools near it.
5.
Always hold the plug when you unplug the power cable.
6.
Do not excessively bend the connectors or other parts of the cables.
7.
Do not move the device while it is connected.
8.
Connect it only to a 100 - 240 VAC electric outlet.
9.
Confirm that the AC adapter is securely and fully inserted into the electric outlet.
10. Connect only the AC adapter provided with the device.
Do not allow contact with static electricity from people or other devices.
Be sure to remove any dust or dirt from the device and the power cable.
Do not stretch or hook the cables connected to the device.
When disposing of the device, observe the regulations of your local government.
1.3 Prohibitions
Do not store or install the device in the following locations. Doing so could cause a fire or have an adverse effect on the
product.
Locations where static electricity or strong magnetic fields are generated
Locations subject to vibrations
On walls from which there is a risk the product may fall if the installation is not strong enough
Locations where people are walking
Locations exposed to direct sunlight
Near open flames, devices that generate hot air, or locations where hot air collects
Locations at risk of water leaks or electric faults
Locations that are very dusty
