KPWL-0300 User's Manual
28
Basic Settings
Item
Description
Values that can be set
Prescribed value
Backhaul Mode
You can specify whether to treat the device as a core unit
or slave unit.
Slave, Core
Slave
Band
You can specify in which mode, IEEE 802.11a, n, or ac, to
operate.
11a, 11a/n, 11a/n/ac
11a/n/ac
Channel
You can specify the channels that are used. The values
that can be set vary depending on the value specified for
"Band".
•
For 11a:
36 ch to 140 ch
•
For 11a/n:
38 ch to 134 ch
•
For 11a/n/ac:
42 ch to 122 ch
•
For 11a:
36 ch
•
For 11a/n:
38 ch
•
For 11a/n/ac:
106 ch
Automatic Channel
Selection
You can specify whether to automatically select unused
channels when scanning for channels at startup.
ON, OFF
OFF
Indoor/Outdoor
Specify whether to use the device indoors or outdoors.
By selecting outdoor, you are prevented from selecting
channels that are prohibited from use outdoors by
accident.
Indoor, Outdoor
Indoor
Channel Bandwidth
The values that can be set vary depending on the value
specified for "Band".
•
For 11a:
Fixed at 20 MHz
•
For 11a/n:
20 MHz, 40 MHz
•
For 11a/n/ac:
20 MHz, 40 MHz, Auto
80/40/20 MHz
•
For 11a:
20 MHz
•
For 11a/n:
40 MHz
•
For 11a/n/ac:
Auto 80/40/20
MHz
Tx Power
You can specify the strength of the wireless output. The
larger it is, the higher the output.
1 to 12
12
SafeZone
You can specify whether to allow encryption of the relay
circuits.
ON (performed) / OFF (not
performed)
ON
SafeKey
Devices that have the same value are considered to
belong to the same network so intercommunication is
possible. If they are different, relaying is not possible. This
is how networks are separated.
1 to 64 single-byte
alphanumeric characters
picocela
AP Control
You can specify whether to detect when the upstream
circuit is cut off and automatically turn off the access point
function.
ON, OFF
ON
Waiting time for turning
off AP
If you selected ON for "AP Control", specify the time that
the access point function is automatically turned off.
60
Reroute
Clicking [Execute] implements rerouting.
* You can set the "Band", "Channel", and "Channel Bandwidth" on the access point (5 GHz) on this page. For
details, refer to "Basic Settings" in "Items that can be set in the "Access Point" tab".
