KPWL-0300 User's Manual
23
6.4 List of Setting Items
Items that can be set in the "Access Point" tab
Basic
Item
Description
Values that can be
set
Default value
Wireless
The Access Point function can be enabled or disabled.
Enable, Disable
Enable
Band
You can specify in which mode, IEEE 802.11a, b, g, n, or
ac, to operate.
•
For 2.4 GHz:
11b, 11g, 11b/g, 11g/n,
11b/g/n
•
For 5 GHz:
11a, 11a/n, 11a/n/ac
•
For 2.4 GHz:
11b/g/n
•
For 5 GHz:
11a/n/ac
Enable SSID number
You can specify the number of SSIDs that are enabled.
1 to 16
1
SSID
You can specify the SSID (Service Set IDentifier: Access
point identifier).
*You can also specify the VLAN ID if "VLAN Switch" is
ON. For details, refer to "VLAN" in "Items that can be set
in the "Wireless Backhaul Network" tab".
1 to 32 single-byte
alphanumeric
characters
•
For 2.4 GHz:
KPWL-0300-******_G
•
For 5 GHz:
KPWL-0300-******_A
(****** are the last 6
digits in the MAC
address of the main
unit)
Channel
You can specify the channels that are used.
•
For 2.4 GHz:
1 ch to 13 ch
•
For 5 GHz:
36 ch to 140 ch
•
For 2.4 GHz:
11 ch
•
For 5 GHz:
36 ch
Channel Bandwidth
The values that can be set vary depending on the value
specified for "Band".
•
If 11b, 11g, 11b/g, or 11a is specified:
Fixed at 20 MHz.
•
If 11g/n or 11b/g/n is specified:
You can select from 20 MHz, 40 MHz, or +xch.
(The value for *x varies depending on the value specified
for the channel.)
•
If 11a/n is specified:
You can select from 20 MHz or 40 MHz.
•
If 11a/n/ac is specified:
You can select from 20 MHz, 40 MHz, or Auto 80/40/20
MHz.
* There are some items that cannot be selected,
depending on the "Channel" value.
•
If 140ch is selected for "Channel":
Fixed at 20 MHz. You cannot select 40 MHz or Auto
80/40/20 MHz.
•
If 132 - 136ch is selected for "Channel":
You cannot select Auto 80/40/20 MHz.
See left column
Varies depending on
the value specified for
"Band".
*With the basic settings on the 5 GHz side, you can set the "Band", "Channel", and "Channel Bandwidth" for the
wireless backhaul. For details, refer to "Basic Settings" in "Items that can be set in the "Wireless Backhaul
Network"" tab.
