NCL-195 LIGHTING AND SHUTDOWN (cont.)
PAGE 33
1. Turn off all electrical power to fireplace.
NOTE: When fireplace is initially lit, condensation will appear
on the glass; this is normal in all gas fireplaces and will
disappear after several minutes.
3. Wait five (5) minutes to allow any gas that may have accumulated
inside firebox to escape. If you then smell gas,
STOP!
Follow safety
information on front cover and on previous page of this installation
manual. If you don‟t smell gas, go to next step.
LIGHTING
5 MINUTES
CAUTION: If fireplace will not operate, follow instructions
TURNING OFF GAS TO FIREPLACE and call
your service technician or the gas supplier.
ATTENTION: This fireplace is equipped with an ignition device
which automatically lights the pilot. DO NOT try to
light the pilot by hand.
2. Press hand held remote
MODE
button to
„OFF‟
.
4. Turn ON all electrical power to fireplace.
5. Press hand held remote
MODE
button to
„ON‟
.
STOP! Read safety information on previous page and front
cover of this manual before continuing.
TURNING OFF GAS TO FIREPLACE
1. Press hand held remote
MODE
button to
„OFF‟
.
2. Turn OFF all electrical power to fireplace if service is required.
3. Turn manual shut-off valve to
OFF
.
Power OFF
Power ON
Power OFF
OFF
OFF
ON
Summary of Contents for Nicollet NCL-195
Page 43: ...PAGE 42...
Page 44: ...PAGE 43...
