Koyoe KY-EST06KH, User Manual

Page: 24 / 86

24
3) In the above interface, after entering the password, press the "ENTER" key to enter the
following menu. The interface will display the current working mode. Press the "ENTER" key to
select the required working mode through the "UP" and "DOWN" keys. Press the "ENTER" key
again to confirm the selected mode, move the cursor to "OK", and press the "ENTER" key to
confirm the input.
5) After the above operations, press the "ESC" key to return to the main interface to observe the
operation state after changing the mode.
3.2. Forced Charging
This mode must take effect after being connected to the grid. In the forced charging mode, the
inverter selects the appropriate power to charge the battery according to the allowable charging
current of BMS and the calculated value of energy management. When the SOC is charged to the
upper limit or the working mode is changed, it exits the forced charging mode.
In mode selection, please select the contents shown below to set the forced charging mode. For
other steps, please refer to 3.1.
3.3. Forced Discharge