36
Outdoor module: Overview of internal components
Attention!
Touching conductive components may lead to dangerous electrocution injuries. Some components on the installation boards
conduct electricity even when the supply voltage is switched off.
■
When carrying out work on the outdoor module, disconnect the system from voltage, e.g. with a separate fuse or
main switch. Check that the voltage has been disconnected and secure the device against restarting.
■ Wait at least 4 minutes for the voltage of charged capacitors to drop before commencing work.
Outdoor module with one fan: HPMO2-8, HPMO2-12
1
2
3
6
7
8
10
11
12
13
14
15
16
17
19
20
21
22
23
24
25
26
27
29
30
31
35
32
33
34
9
18
28
35
36
37
38
40
44 45
39
42
41
43
4
5
[1] - Cable gland
[2] - Reactor
[3] - Plate heat exchanger
[4] - Water flow switch
[5] - Outlet water connector pipe assembly
[6] - Intlet water connector pipe assembly
[7] - Liquid Accumulator
[8] - Back Panel assembly
[9] - Four-way valve
[10] - Filter
[11] - Filter
[12] - Check Valve
[13] - Needle valve
[14] - Globe Valve
[15] - High pressure switch
[16] - Low pressure switch
[17] - Electronic expansion valve
[18] - Electronic expansion valve
[19] - Handle
[20] - Right panel assembly
[21] - Panel support
[22] - Plate heat exchanger
[23] - Plate heat exchanger bracket
[24] - Compressor
[25] - Compressor damping block
[26] - Suspended Plate
[27] - Chassis assembly
[28] - Compressor cover1
[29] - Compressor cover3
[30] - Compressor cover2
[31] - Wind deflector
[32] - Fan grille
[33] - Top cover
[34] - DC motor
[35] - Axial fan blade
[36] - Middle partition assembly
[37] - Motor Bracket Assembly
[38] - Removable right net
[39] - Column assembly
[40] - Removable rear net
[41] - Finned heat exchanger
[42] - Top beam assembly
[43] - Top cover assembly
[44] - Electrical box assembly
[45] - Electrical box waterproof cover
Summary of Contents for HPMI2 - 12
Page 47: ......
