Kortek corporation
54
of
99
PDP R&D Center
7. Installation
7.1 Stand Type
7.1.1 Notice for installing
(A). Do not set the PDP on an unstable place, vibrating place and inclined place. The PDP may fall or drop, and
it may cause serious injury to a person, and serious damage to the product.
(B). When you carry the PDP module, you must do it by two workers in order to avoid unexpected accidents.
(C). Do not set the PDP around heating apparatus.
(D). Do not set the PDP near high voltage cables.
7.1.2 Method of Installation
■ Order of Installation
1. Take out Stand from Stand Box and put in even place.
2. Take out Bond and put it on Stand through adjusting Hole.
Attention:
Pay attention not to confuse the direction of Stand and main body.
3. Assemble with Screw contained in Accessory Box according to following drawing.
4. Put it on flat place after assembly.