Korg SoundLink MW-1608 User Manual Download Page 29

Page: 29 / 65

Analog Controls

BREAK button/indicator

MUTE

for all input

channels (Chan-
nel 1–24 on the
MW-2408; Chan-

nel 1–16 on the MW-1608) in a
single action.

Press the button again to

return to the previous state.

When this is enabled, the

indicator blinks.

The following inputs and
buses are not muted by
the BREAK function.

• STEREO IN input
• TALKBACK input
• PFL bus of each channel

Group Master Section.

Here is where you blend your
Sub Group mixes into the Main
L/R mix or determine their level
if you're routing them out of the
rear panel

GROUP OUT

jacks.

SUB GROUP ASSIGN TO L/R

switches

These switches send the signal of
each group to the

MAIN L/R

bus.

SUB GROUP MASTER

faders

Adjusts the output level sent to
the Main L/R (if assigned) and to
the Sub Master Outputs.

PFL

switches/indicators.

These switches let you audition
each group's signal in the moni-
tor.

When they are enabled, the

signal that has been adjusted by
each

SUB GROUP MIX

fader is sent

to the

PHONES

jack and to the

MONITOR OUT

output jacks.

If this is enabled, the indicator is
lit.

MAIN MIX (L/R) fader.

Adjusts the level of the

MAIN MIX

The signal adjusted

by the

MAIN MIX

fad-

er is also sent to the
USB port output.

Hook

-up
/Back panel

Analog C

ontr

ols

Digital C

ontr

ols

Summary of Contents for SoundLink MW-1608


































































Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands

Korg SoundLink MW-1608, User Manual

Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands