64
Included items and options
Included items
Power cord, Quick Start Guide, iZotope RX Elements license card
Options
Rack mount
hardware
MW-001 (for MW-2408 only)
Foot switch
PS-1 or PS-3 pedal switch
NOTE
Specifications and appearance are subject to change without notice.
Rack mounting (MW-2408 only)
To install this unit in a rack, you can use a dedicated mixer bracket
made by KORG (sold separately only for use with the MW-2408)
Install the unit in a standard EIA-specification 19-inch rack.
A minimum of 12U (approximately 533 mm) of space is required
for rack installation. To leave room for connecting cables to the
back panel, we recommend that you allow 14U (approximately 623
mm) of space. Before you begin installation, consider cabling and
ventilation, and make sure that there is sufficient space.
Two or more adults must work together when installing this
unit in a rack.
Allow sufficient space (10 cm or more) around the unit to
ensure ventilation and to prevent heat buildup inside the
unit. If other equipment is also installed in the rack, leave 1U
or more of space between this unit and other units.
Heat buildup might cause malfunction or fire.
Before installing this unit in a rack, disconnect all cables from
the unit.
Cables left connected might cause the unit to tip over or
nearby objects to fall, possibly causing electric shock or
malfunction.
Specifications
MW-2408 Rack Mounting
Physical
Dimensions
* Excluding
protrusions
MW-2408
W480 mm x H187 mm x D530 mm
* Unit width excluding side panels is 440 mm
MW-1608
W396 mm x H187 mm x D530 mm
* Unit width excluding side panels is 256 mm
Weight
MW-2408
20.5 lbs / 9.3 kg
MW-1608
17.0 lbs / 8.0 kg