Korg SoundLink MW-1608 User Manual Download Page 65 | Manualshive

Page: 65 / 65

background image

Side panel (left)

Side panel

(right)

Bracket (left)

Bracket

(right)

65

.

Use a screwdriver to

remove the screws (6 loca-
tions) from the side of this
unit, and detach the left and
right side panels.

3

Using the screws included

with the bracket, attach the
left and right brackets to
this unit.

Use only the screws includ-
ed with the bracket, and
fasten them ﬁrmly to this
unit.
If you use different screws,
it might not be possible
to tighten them securely,
allowing the unit to fall and
possible cause injury or
damage.

$

Install the unit in the rack.

Rack

© 2020 KORG, All Rights
Reserved. All other
trademarks are property of
their respective holders.

MW-2408 Rack Mounting

IMPORTANT NOTICE TO CONSUMERS

This product has been manufactured according to strict specifications and voltage requirements that are applicable in the country in which it is intended that this product
should be used. If you have purchased this product via the internet, through mail order, and/or via a telephone sale, you must verify that this product is intended to be
used in the country in which you reside.
WARNING: Use of this product in any country other than that for which it is intended could be dangerous and could invalidate the manufacturer’ s or distributor’ s
warranty. Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer’ s or distributor’ s warranty.

4015-2 Yanokuchi, Inagi-City,

Tokyo 206-0812 JAPAN

«
...
63
64
65

Summary of Contents for SoundLink MW-1608


































































Reviews:

No comments

Related manuals for SoundLink MW-1608

Brand: ABB Pages: 50

ACS880-01 Series

Brand: ABB Pages: 17

Brand: ABB Pages: 36

Brand: GALLERY Pages: 18

Brand: MacDon Pages: 84

Brand: MacDon Pages: 89

Brand: Patton electronics Pages: 18

Brand: idiag Pages: 12

Brand: TC Electronic Pages: 2

Brand: Bahco Pages: 131

Brand: Bahco Pages: 126

Brand: Federal Signal Corporation Pages: 12

Brand: Haag-Streit Pages: 16

Martin ERA 800 Performance

Brand: Harman Pages: 32

Martin ERA 600 Performance

Brand: Harman Pages: 32

Brand: Hardt Pages: 22

Brand: Sabre Pages: 2

Brand: Parkside Pages: 58

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands