Korg SoundLink MW-1608 User Manual Download Page 59 | Manualshive

Page: 59 / 65

background image

59

DYN (dynamics)

Type

Details

Parameter / effect

P01: Limiter

Limits excessive input.

Attack:
Time until compression begins
Sens:
Sensitivity of operation

P02: Comp Hard
P03: Comp Soft

Limits high levels to make the sound more consis-
tent and improve the loudness.
"Comp Hard" applies the effect more strongly, and
"Comp Soft" applies the effect more gently.

P04: NsGate Hard
P05: NsGate Soft

Reduces noise by turning down the output when the
input level is low.
"NsGate Hard" applies the effect more strongly, and
"NsGate Soft" applies the effect more gently.

Release:
Time until the output is reduced
Sens:
Sensitivity (threshold that is consid-
ered to be noise)

GEQ (graphic equalizer)

Mode

Contents

Wide (default)

A basic wide-type graphic equalizer.
Since each band is wide, nine bands cover the entire frequency range, making this suitable for
adjusting the overall sound.
The frequency of each band is ﬁxed.

Narrow

A high-class 1/3rd octave graphic equalizer.
Since each band is narrow, this allows you to make detailed adjustments as appropriate for the
acoustics of the live venue, or to increase the feedback margin.
The frequency of each of the nine bands can be adjusted, and you can select the frequencies
from the standard steps of a typical 31-band rack-mounted EQ.

DFX (digital effect)

Type

Details

Parameter / effect

P01: Rev Hall
P02: Rev Hall Warm

Provides the reverberation of a hall.
"Rev Hall Warm" provides a warm tone.

Time:
Time that the reverberation continues
HiDamp:
High frequency attenuation of the
reverberant sound

P03: Rev Room
P04: Rev Room Warm

Provides the reverberation of a small room.
"Rev Room Warm" provides a warm tone.

P05: Rev Vocal
P06: Rev Vocal Warm

Provides reverberation suitable for vocals.
"Rev Vocal Warm" provides a warm tone.

P07: Rev Stage
P08: Rev Stage Warm

Provides the reverberation of a mid-sized stage.
"Rev Stage Warm" provides a warm tone.

P09: Rev Plate
P10: Rev Plate Warm

Provides the reverberation of a plate reverb
unit.
"Rev Plate Warm" provides a warm tone.

P11: Rev Spring
P12: Rev Spring Warm

Provides the distinctive reverberation of a
spring reverb unit of the type often built into a
guitar amp.
"Rev Spring Warm" provides a warm tone.

Time:
Time that the reverberation continues
Sway:
Amount of modulation for the springs

P13: Delay Analog

Adds a delayed sound. This models a warm-
toned analog delay.

Time:
Delay time
Feedback:
Amount of repeated delay sounds

P14: Tape Echo

Adds a delayed sound. This models a tape echo
that balances warmth and clarity.

P15: Delay Standard

Adds a delayed sound.

P16: Delay SDD3000

Adds a delayed sound. This produces a clear
delay sound modeled on the Korg SDD3000
digital delay.

Digital Effects

«
...
57
58
59
60
61
...
»

Summary of Contents for SoundLink MW-1608


































































Reviews:

No comments

Related manuals for SoundLink MW-1608

ActiveFinder One

Brand: LaserLiner Pages: 92

Brand: Macht Dental Pages: 8

Brand: Raven Pages: 48

Brand: Pacific Pages: 16

Brand: R&S Pages: 371

Brand: R.M. Young Pages: 9

Brand: TATU Pages: 30

Brand: Rane Pages: 4

Brand: Sabio Pages: 182

Brand: Abus Pages: 12

Brand: Valko Pages: 10

Brand: Feniex Pages: 5

Zen-O lite RS-00600

Brand: GCE Pages: 20

Brand: Billy Goat Pages: 14

ARIEDO HDC 300W

Brand: GSi Pages: 28

Brand: Nippon Genetics Pages: 14

Groline HI981412

Brand: Hanna Instruments Pages: 44

Chlorinsitu-III

Brand: ProMinent Pages: 120

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands