Korg SoundLink MW-1608 User Manual Download Page 24

Page: 24 / 65

Stereo Channels • Same and Different

Analog Controls

PFL switch /
indicator

Enables (

) or

disables (

) the

PFL

(pre-fader listen) function.

If this button is enabled, the

signal before adjustment by the
channel fader (“pre-fader”) is
output sent to the

PHONES

jack

and the

MONITOR OUT

output

jacks.

When in the Enable position,

the indicator is lit.

Stereo channels have a few dif-
ferent controls and many identi-
cal ones.

Different than
Mono Channels

TRS stereo Line inputs

Mic/Line switch

No Compressor function

2-band

ﬁxed

MID EQ

Shared channel controls (9/10, 11/12
combined etc.)

Same as Mono Channels

Input Gain

Hi Eq

Lo Eq

Aux Sends

Pan

Mute

OL & -20 LEDs

Bus Assign switches

60mm fader

PFL switch

Source Mic /
Line (stereo
channels).

Switches the
channel setting
according to the
input jack(s)
used.

Set this to

MIC

(

) if using the

rear panel

MIC

jack.

Set it to

LINE

(

) if using the

LINE IN

jack(s).

The MIC IN jack and LINE
IN jack cannot be used at
the same time.

Hook

-up
/Back panel

Analog C

ontr

ols

Digital C

ontr

ols

Summary of Contents for SoundLink MW-1608


































































Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands

Korg SoundLink MW-1608, User Manual

Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands