Korg SoundLink MW-1608 User Manual Download Page 25

Page: 25 / 65

100

200

500

10k

20k

MIDRANGE

100

200

500

10k

20k

MIDRANGE

Analog Controls

MID EQ
(stereo channels)

Stereo channel

MID

equaliza-

tion consists
of two controls
with ﬁxed band
centers: 2.5kHz
high Mid and
250 Hz low Mid.

That makes it diﬀerent than

mono channel

MID

EQ.

Whereas mono MID is one

band that can be "slid" around,
stereo EQ is just two separate
ﬁxed bands, one at the high and
one at the low end of the mid-
range band.

Stereo Channel Midrange Equalization

Mono Channel Midrange Equalization

A few more tips on
equalization.

Almost everything can be
improved with equaliza-
tion. At least TRY various
settings.

Equalize with your ears.
Don't stare at the EQ knob:
close your eyes and

listen

Focus on the overall mix.
You’re far better oﬀ EQ-ing
your channels so that every
instrument has its own
place in the mix, rather
than trying to make each
instrument sound good in
isolation.

Cut ﬁrst; boost second.

In a live setting, very few
people will be hearing
both left and right speak-
ers equally so it’s best not
to pan things dead left or
right.

Summary of Contents for SoundLink MW-1608


































































Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands

Korg SoundLink MW-1608, User Manual

Search results

Summary of Contents for SoundLink MW-1608

Reviews:

Related manuals for SoundLink MW-1608

Brands by name

Popular brands