Korg Pa300 User Manual Download Page 147

Page: 147 / 378

143

Sequencer

Song Edit: Copy

rence

Top parameters, you can select a single note, or a single percus-
sive instrument in a Drum track.

Note:

These parameters are available only when the All or Note

options are selected.

Song Edit: Copy

Here you can copy tracks or phrases.

After setting the various parameters, touch Execute to start the
operation.

Note:

If you copy too many events on the same “tick”, the “Too

many events!” message appears, and the copy operation is aborted.

Mode

Use this parameter to select the Copy mode.

Merge

Copied data are merged with the data at the tar-
get position.

Overwrite

Copied data replace all data at the target position.

Warning:

Deleted data cannot be recovered!

From Track… To Track

Use these parameters to select the source and target track to
copy.

All

All tracks. The target track cannot be selected.

Track 1…16

Selected source and target tracks.

Start Measure… End Measure

These parameters are the starting and ending measure to copy.
For example, if From Measure=1 and To Measure=4, the first
four measures are copied.

To Measure

This parameter is the first of the target measures.

Repeat Times

Number of times the copy must be executed. Copies will be con-
secutive.

Song Edit: Move

Here you can shift a track forward or backward by just a few
ticks or whole measures.

After setting the various parameters, touch Execute to complete
the operation.

Track

Use these parameters to select the track you want to move.

Track 1…16

Selected track.

Start / End Tick

These parameters set the starting and ending point of the range
to move.

To Tick

This parameter allows you to set the target starting point of the
moved track.

Song Edit: RX Convert

You can use the RX Convert page to convert notes of the Stan-
dard MIDI File into RX Noises, and vice-versa. This will help
programming Songs on an external sequencer.

After having chosen a track to convert, touch Execute to com-
plete the operation.

Track

Use these parameters to select the track containing the notes or
RX Noises you want to convert.

RX Note Velocity

Use this parameter to adjust the volume level of the RX Noises in
the selected track(s).

Pa300 User Manual v150 (English).book Page 143 Saturday, March 29, 2014 5:29 PM

Summary of Contents for Pa300



























































































































































































































































































































































































Search results

Summary of Contents for Pa300

Reviews:

Related manuals for Pa300

Brands by name

Popular brands

Korg Pa300, User Manual

Search results

Summary of Contents for Pa300

Reviews:

Related manuals for Pa300

Brands by name

Popular brands