manualshive.com logo in svg

Korg microSTATION, Operation Manual

Share
Download
Korg microSTATION Operation Manual Download Page 75

Specifications and option    Specifications

71

Specifications and option

Specifications

Operating temperature

0 – +40 °C (non-condensing conditions)

Keyboard

61-note natural touch mini-keyboard (velocity sensitive; aftertouch not supported)

System

EDS-i (Enhanced Definition Synthesis - integrated)

Mode

Combination, Program, Sequencer, Global/Media

Sound Engine

Maximum Polyphony

120 voices max, single mode
60 voices max, double mode
* The actual maximum polyphony will vary depending on oscillator settings 
such as stereo samples and velocity crossfading.

Preset PCM

49 Mbytes (when calculated as 16-bit linear data)
360 multisamples, 484 drum samples (including 24 stereo)

Programs

Oscillator

OSC1 (Single), OSC1+2 (Double): Stereo multisamples are supported
4 velocity zones per oscillator, with switching, crossfades and layers.

Filters

Four types of filter routing (single, serial, parallel, 24 dB)
Two multi-mode filters per voice (low pass, high pass, band pass, band reject)

Modulation

For each voice, two envelope generators (Filter & Amp), two LFOs, two key 
tracking generators (Filter & Amp), and two AMS mixers
In addition, pitch EG, common LFO, and two common key tracking 
generators

Combinations

16 Timbres

Up to sixteen timbres, keyboard and velocity split/layer/crossfade, and 
modifications to the program setting via the Tone Adjust function

Master Keyboard 
functionality

These allow you to control external MIDI devices

Drum Kits

Stereo and mono drumsamples.
4-way velocity switches with crossfades and adjustable crossfade shapes (Linear, Power, Layer).

The number of ...
-Combinations
-Programs
-Drum Kits

User Combinations

384 Combinations/256 Preload

User Programs

512 Programs/480 Preload

User Drum Kits

48 Drum Kits/25 Preload

Preset Programs

256 GM2 Pr 9 GM2 Drum Programs

Effects

5 Insert Effects

In-line processing; stereo in - stereo out.

2 Master Effects

Two effects sends; stereo in - stereo out.

1 Total Effect

For overall processing on the main outputs, such as compression, limiting, 
and EQ; stereo in - stereo out.

Effect types

Total of 134 types (select from 74 types for insert effects, 101 types of master 
effect 1, 120 types for master effect 2, and 61 types for total effect)

Modulation

Dynamic modulation, tempo sync delay, LFO

Effects Control Bus

Stereo side-chaining for limiter, gates, vocoders, etc.

Dual polyphonic arpeggiators

Program mode: one arpeggiator available. Combination and Sequencer modes: two arpeggiators 
available.

5 preset arpeggio patterns

640 user arpeggio patterns (512 preload)

Audition Riff function

383 audition riffs, transposable

Sequencer

Tracks

16 MIDI Tracks & 1 Master Track

Songs

128 Songs

Resolution

480 ppq (parts per quarter-note)

Tempo

40.00–300.00 bpm (1/100 bpm resolution)

Up to

210,000 MIDI events

Grid Sequence 
function

Allows creation of sequence loops for drums etc., with up to 64 grids per note

Template songs

16 preset/16 user template songs

Format

Korg (microSTATION) format, SMF (formats 0 and 1) supported

Demo songs

3 songs

Global/Media

Global

Master tune, transpose, MIDI settings

Media

Load, Save, Utility

Summary of Contents for microSTATION

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands