Korg drumlogue Owner'S Manual Download

Page: 53 / 59

Miscellaneous

Restoring the Factory settings

You can restore the drumlogue’s preset Programs and global settings to their origi

nal factory-set state at any time.

Begin with the drumlogue turned Off.

While holding down the SHIFT button and the

(REC) button, turn the

drumlogue On.

“FACTORY RESET” will be indicated in the display.

Turn Parameter knob 1, and select a target setting (ALL, GLOBALS, PRO

GRAMS, SAMPLES, UNITS) to return to the factory default.

ALL

: GLOBALS, KITS, PROGRAMS, SAMPLES, and UNITS, all items return to

their factory defaults.

Please note that all data are rewritten to the factory defaults (the saved pro

grams and drum kits are erased).

GLOBALS

: The settings of the global parameters return to their factory defaults.

KITS

: The preset kits (drum kits A01 to D16) return to their factory defaults.

This will rewrite the preset kit to factory defaults. If you want to keep the

preset kit, use the KIT SAVE button to save it in program banks E01 to H16

in advance.

PROGRAMS

: The preset programs (programs A01 to D16) return to their fac

tory defaults.

This will rewrite the preset program to factory defaults. If you want to

keep the preset program, use the PROGRAM SAVE button to save it in

program banks E01 to H16 in advance.

SAMPLES

: The sample bank of USER and EXP returns to the factory default

state.

UNITS

: All of the installed logue SDK units (user synth, delay, reverb, master

effects) return to their factory defaults.

Press the

(YES) button.

The display will indicate the message "Are you sure?".

Press the

(YES) button again.

The factory-set default data will be reloaded, and the drumlogue will be re-

stored to its factory default state.

TIP

Press the

(NO) button to cancel.

Never turn off the drumlogue while data is being loaded. Doing so might

damage the internal data.

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands