Korg drumlogue Page 28 Owner'S Manual Download

Page: 28 / 59

SNAP.LV (SNAPPY LEVEL)

[0.0%...100.0%]

Adjusts the snappy volume of the snare drum.

CUTOFF

[L0.0%...L99.5%, THRU, H0.5%...H100.0%]

Adjusts the cutoff frequency of the filter.

You can select the low-pass filter, no filter (THRU), or the high-pass filter.

RESON (CUTOFF RESONANCE) [0.0%...100.0%]

Adjusts the cutoff resonance of the filter.

If you increase the value, the filter oscillates, which may cause the sound to

continue.

MIX/ROUTE

PAN

[L100%...L1%, C, R1%...R100%]

Adjusts the pan pot (left and right stereo localization).

SPREAD

[<100%...<1%, 0, >1%...>100%]

Adjusts the spread of sound (stereo feeling).

DELAY [0.0%...100.0%]

Adjusts the feed amount of the delay effect.

REVERB [0.0%...100.0%]

Adjusts the feed amount of the reverb effect.

MASTER

[ON, BYPASS]

Sets the master effect to On or Bypass.

SIDECH (SIDECHAIN)

[0.0%...100.0%]

Adjusts the feed amount of the SIDECHAIN pass.

LT, HT (Low tom, High tom)

Control knob

LT (HT) DECAY

[0...1023]

Adjusts the sounding length of the low-tom or high-tom drumhead.

The greater the value, the longer the sound.

LT (HT) TUNE

[0...1023]

Adjusts the pitch of the low tom or high tom. The greater the value, the higher the sound.

LT (HT) DETUNE

[0...1023]

Adjusts the tuning deviation between the two drumheads for low tom or high tom.

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands