Korg drumlogue Page 27 Owner'S Manual Download

Page: 27 / 59

RESON(CUTOFF RESONANCE) [0.0%...100.0%]

Adjusts the cutoff resonance of the filter.

If you increase the value, the filter oscillates, which may cause the sound to

continue.

MIX/ROUTE

PAN

[L100%...L1%, C, R1%...R100%]

Adjusts the pan pot (left and right stereo localization).

DELAY [0.0%...100.0%]

Adjusts the feed amount of the delay effect.

REVERB [0.0%...100.0%]

Adjusts the feed amount of the reverb effect.

MASTER

[ON, BYPASS]

Sets the master effect to On or Bypass.

SIDECH (SIDECHAIN)

[0.0%...100.0%]

Adjusts the feed amount of the SIDECHAIN pass.

TIP

The master effect has an input that is referred to as the SIDECHAIN pass.

For example, in COMPRESSOR, you can use the SIDECHAIN pass to ob

tain a ducking effect.

SD (Snare drum)

Control knob

DECAY [0...1023]

Adjusts the sounding length of the drumhead. The greater the value, the longer the sound.

TUNE [0...1023]

Adjusts the pitch. The greater the value, the higher the sound.

SNAP.DEC (SNAPPY DECAY)

[0...1023]

Adjusts the snappy sound length of the snare drum.

SOUND SELECT

SNAPPY TYPE

[01..09]

Select the snappy tone of the snare drum.

PARAMETERS

TONE [0.0%...100.0%]

Adjusts the tuning deviation of the two drumheads.

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands