manualshive.com logo in svg

Korg drumlogue, Owner'S Manual

Share
Download
Korg drumlogue Owner'S Manual Download Page 31

31

DECAY (RS only) 

[0.0%...100.0%]

Sets the decay time. The greater the value, the longer the sound.

START [0.0%...100.0%]

Sets the start position of sample playback.

END [0.0%...100.0%]

Sets the end position of sample playback.

CUTOFF 

[L0.0%...L99.5%, THRU, H0.5%...H100.0%]

Sets the cutoff frequency of the filter.

You can select the low-pass filter, no filter (THRU), or the high-pass filter.

RESON (CUTOFF RESONANCE)  [0.0%...100.0%]

Sets the cutoff resonance of the filter.

  If you increase the value, the filter oscillates, which may cause the sound to 

continue.

REDUX [0.0%...100.0%]

Adjusts the distortion amount due to bit reduction.

DRIVE [0.0%...100.0%]

Sets the distortion amount of the sound source. A fat sound is created by moder-

ately distorting the sound source.

MIX/ROUTE

PAN 

[L100%...L1%, C, R1%...R100%]

Adjusts the pan pot (left and right stereo localization).

SPREAD 

[<100%...<1%, 0, >1%...>100%]

Adjusts the spread of sound (stereo feeling).

DELAY [0.0%...100.0%]

Adjusts the feed amount of the delay effect.

REVERB [0.0%...100.0%]

Adjusts the feed amount of the reverb effect.

MASTER 

[ON, BYPASS]

Sets the master effect to On or Bypass.

SIDECH (SIDECHAIN) 

[0.0%...100.0%]

Adjusts the feed amount of the SIDECHAIN pass.

Summary of Contents for drumlogue




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands