background image

32

SP1, SP2 (Sample sound sources 1, 2)

Control knob

SP1 (SP2) ATTACK 

[0...1023]

Adjusts the attack time of sample sound source 1 (or 2). The greater the value, the 

slower the sound rises.

SP1 (SP2) DECAY 

[0...1023]

Adjusts the decay time of sample sound source 1 (or 2). The greater the value, the 

longer the sound.

SP1 (SP2) TUNE 

[-24.00...0.00...+24.00]

Adjusts the pitch of sample sound source 1 (or 2). The greater the value, the higher 

the sound.

SOUND SELECT

BANK 

[CH, OH, RS, CP, MISC, USER, EXP]

(Same as CH/OH/RS/CP)

SAMPLE [01..16/64/128]

(Same as CH/OH/RS/CP)

PARAMETERS

START [0.0%...100.0%]

Sets the start position of sample playback.

END [0.0%...100.0%]

Sets the end position of sample playback.

CUTOFF 

[L0.0%...L99.5%, THRU, H0.5%...H100.0%]

Sets the cutoff frequency of the filter.

You can select the low-pass filter, no filter (THRU), or the high-pass filter.

RESON (CUTOFF RESONANCE)  [0.0%...100.0%]

Sets the cutoff resonance of the filter.

  If you increase the value, the filter oscillates, which may cause the sound to 

continue.

REDUX [0.0%...100.0%]

Adjusts the distortion amount due to bit reduction.

DRIVE [0.0%...100.0%]

Sets the distortion amount of the sound source. A fat sound is created by moder-

ately distorting the sound source.

Summary of Contents for drumlogue




























































Reviews: