Korg drumlogue Owner'S Manual Download

Page: 35 / 59

NOISE

SOUND SELECT

ALGO

[LPF 2, LPF 4, BPF 2, BPF 4, HPF 2, HPF 4, DECIM]

Select the noise sound type. The low pass (LPF), band pass (BPF), and high pass

(HPF) provide two types of filters: -12dB/oct and -24dB/oct.

DECIM

is the noise source that uses sampling rate decimation.

PARAMETERS

COLOR [0.0%...100.0%]

Adjusts the darkness and brightness of the tone. The lower the parameter value,

the darker the tone.

PEAK (other than DECIM)

[0.0%...100.0%]

Adjusts the peak of the filter.

ATTACK [0.0%...100.0%]

Sets the attack time. The higher the value, the slower the rises of the sound.

RELEASE [0.0%...100.0%]

Sets the release time. The higher the value, the longer the sound.

MIX/ROUTE

PAN

[L100%...L1%, C, R1%...R100%]

Adjusts the pan pot (left and right stereo localization).

SPREAD

[<100%...<1%, 0, >1%...>100%]

Adjusts the spread of sound (stereo feeling).

DELAY [0.0%...100.0%]

Adjusts the feed amount of the delay effect.

REVERB [0.0%...100.0%]

Adjusts the feed amount of the reverb effect.

MASTER

[ON, BYPASS]

Sets the master effect to On or Bypass.

SIDECH (SIDECHAIN)

[0.0%...100.0%]

Adjusts the feed amount of the SIDECHAIN pass.

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands