Korg drumlogue Owner'S Manual Download

Page: 46 / 59

INDIV. OUT1 (Button 4)

OUT 1

[BD, SD, LT, HT, CH, OH, RS, CP, SP1, SP2, MULTI]

Sets the part to be output from the AUDIO OUT1 jack on the rear panel.

OUT 2

[BD, SD, LT, HT, CH, OH, RS, CP, SP1, SP2, MULTI]

Sets the part to be output from the AUDIO OUT2 jack on the rear panel.

OUT 3

[BD, SD, LT, HT, CH, OH, RS, CP, SP1, SP2, MULTI]

Sets the part to be output from the AUDIO OUT3 jack on the rear panel.

OUT 4

[BD, SD, LT, HT, CH, OH, RS, CP, SP1, SP2, MULTI]

Sets the part to be output from the AUDIO OUT4 jack on the rear panel.

INDIV. OUT2 (Button 5)

MUTE 1

[OFF, ON]

Turn this ON to mute the part output to the AUDIO OUT1 jack from the AUDIO

OUT L/MONO, AUDIO OUT R, or headphone output.

MUTE 2

[OFF, ON]

Turn this ON to mute the part output to the AUDIO OUT2 jack from the AUDIO

OUT L/MONO, AUDIO OUT R, or headphone output.

MUTE 3

[OFF, ON]

Turn this ON to mute the part output to the AUDIO OUT3 jack from the AUDIO

OUT L/MONO, AUDIO OUT R, or headphone output.

MUTE 4

[OFF, ON]

Turn this ON to mute the part output to the AUDIO OUT4 jack from the AUDIO

OUT L/MONO, AUDIO OUT R, or headphone output.

MIDI ROUTING (Button 7)

[1...16, 1-12, 2-13...5-16, 6-1..16-11]

Sets the MIDI channel used for MIDI sending/receiving. In addition to single chan

nels 1 to 16, you can assign 11 parts to different MIDI channels (

→

p.57 "MIDI

Implementation Chart").

ROUTE

[USB+MIDI, USB]

MIDI signals can be sent and received via the MIDI and USB connectors, or by the

USB connector alone.

USB+MIDI

: MIDI messages are received via the USB B connector and the MIDI IN con

Summary of Contents for drumlogue




























































Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands

Korg drumlogue, Owner'S Manual

Search results

Summary of Contents for drumlogue

Reviews:

Related manuals for drumlogue

Brands by name

Popular brands