Korenix JetWave 2111 Series, User Manual

Page: 39 / 99

JetWave 2111/2411 Series User Manual
Page 36
the dropdown list.
Tx Interval: Configure the Tx Interval time, the system will queue the transmit data before time
interval expired. The time unit is millisecond.
Service mode: You can select TCP Server, TCP Client, and UDP listening.
Serial to Ethernet/ Ethernet to Serial Delimiter: Configure the Delimiter and Flush time (a
timeout that the delimiter not matched) setting for Serial to Ethernet or Ethernet to Serial
transmission. There are up to 4 delimiters can be configured here. After the Delimiter is configured,
the data will be stored in the buffer until hit the Delimiter or the Flush time timeout.
Press “
Apply
” to activate the settings.
4.2.6 Traffic Shaping
Use this page to specify the incoming and outgoing traffic limit.
Enable Traffic Shaping: Select the
“
Enable Traffic Shaping
” to activate the feature. After
enabled it, you can continue configure the
“
Incoming Traffic Limit
”, “
Incoming Traffic Burst
”,
“
Outgoing Traffic Limit
” and “
Outgoing Traffic Burst
” with K bits per second.
Press “
Apply
” to activate the settings.
4.2.7 Outbound Firewall
The follow Firewall Settings pages to configure the Firewall setting. There are different types
firewall settings, you can enable the setting, configure the rules, check the table you configured
and Delete Select/All rules.
“
Src IP Filtering
”: Source IP addresses Filtering from your LAN to Internet through the gateway.