Korenix JetWave 2111 Series, User Manual

Page: 54 / 99

JetWave 2111/2411 Series User Manual
Page 51
yes: The VPN function already enabled.
no: The VPN function not enabled yet.
Connection Status:
Connected: The VPN connection already built successfully.
Disconnected: The VPN not connect.
IPsec:
Enabled:
yes: The IPsec function already enabled.
no: The IPsec function not enabled yet.
Connection Status:
Connected: The IPsec connection already built successfully.
Disconnected: The IPsec not connect.
Left IP: left IP corresponds to right IP. The two IPs should be conceptually connected
between two JetWave. For example, bridge port IPs in LAN, or public IPs when
using cellular network
Right IP: described as above.
Tx bytes: the amount of traffic transmitted in bytes from itself to another side. Number of
packet also displayed.
Rx bytes: the amount of traffic received in bytes from itself to another side. Number of
packet also displayed.
4.6.2 OpenVPN Client
OpenVPN is a full-featured SSL VPN which implements OSI layer 2 or 3 secure network extension
using the industry standard SSL/TLS protocol, supports flexible client authentication methods
based on certificates, smart cards, and/or username/password credentials, and allows user or
group-specific access control policies using firewall rules applied to the VPN virtual interface.
The first step in building an OpenVPN 2.x configuration is to establish a PKI (public key
infrastructure). PKI consists of a separate certificate (also known as a public key) and private key