Page 30
Version 02-2010
Compakt-Comfort-2
Operation
Connecting the attached device to the basic machine
•
Drive forward with the basic machine until you can insert the arrester hook into the
matching part by raising the basic machine.
•
Drive very slowly forwards to the stop.
•
Lower the basic machine. The arrester hook must then remain firmly hooked.
•
Switch the engine off: Swivel the eyebolts forwards so that the nuts rest flat against the
flange plate. Screw them tight.
•
Place the parking foot (on both the basic machine and the attached device, if present) in the
working position.
Detaching the attached device from the basic machine
•
Drive to a suitable parking area.
•
Place the parking foot (on both the basic machine and the attached device, if present) in the
parking position, but not completely down to the ground.
•
Loosen the fastening nuts and swivel the eyebolts to the rear.
•
Start the engine, raise the basic machine and drive slowly backwards.
13.
Operating hour meter
The operating hour meters offered by us (article no. 023-1) have the following functions:
•
The engine speed is displayed as soon as the engine is started (max. 9,000 rpm,
engines up to max. 4,000 rpm).
•
If the engine is turned off, the working hours accumulated so far are displayed!
•
Every 99 hours of operation, the display “CHG OIL” (change the oil) appears for the
duration of 4 hours of operation.
•
Every 25 hours of operation, the display “LUBE” (lubricate) appears for the duration
of 2 hours of operation.
THESE INTERVALS ARE PRESET AND CANNOT BE CHANGED!
These settings are not compulsory; please refer to the operating manual for your
appliance
for more exact lubrication and oil change intervals!
Operating hour meter with
engine speed indicator
Fig. 29. Operating hour meter.
