14
Contents
1.
Definitions
14
1.1 Delivery content
14
2.
Safety instructions
14
3.
Basics
15
3.1 Preparing the handheld transmitter
15
3.2 Preparing the mode
15
3.3 Soft start
15
3.4 Low voltage protection
15
4.
General features
16
4.1 Properties
16
4.2 Cooling and mounting
16
4.3 BEC
17
4.4 Toroidal core
17
4.5 Active freewheeling circuit
17
4.6 Part load capability
17
4.7 Sensorless Commutation
17
4.8 Variable clock frequency
17
4.9 Protective functions
17
4.10 Helicopter Mode
18
4.11 Autorotation AR (Bail-out)
18
5.
Connecting the cables
18
5.1 BEC cables (connection to receiver)
18
5.2 Motor cables
18
5.3 Sensor plugs
19
6.
Starting
19
6.1 Table of function range for the
programmable modes
19
7.
Mode programming
19
7.1 Mode 1 - APM
19
7.2 Mode 2 - Glider (with brake)
20
7.3 Mode 3 - Motor flight / Boat (without brake) 20
7.4 Mode 4 - Helicopter
21
7.5 Mode 6 - Forward / Backward
22
7.6 Mode 7 - Reverse rotation
23
7.7 Connection of the Telemetry cable
23
7.8 Mode 8 - Telemetry Port 1
(COOL KOSMIK 250 HV only)
23
7.9 Mode 9 - Telemetry Port 2
(COOL KOSMIK 250 HV only)
24
7.10 Mode 10 - BEC Voltage adjustment
24
8.
KONTRONIK protocol
24
9.
Update
24
10. Bluetooth pairing
24
11. Logging
25
12. Troubleshooting
25
13. Technical assistance, Advice, Hotline
25
13.1 Recycling
25
13.2 Warranty
25
14 cabling
26
15. Messages and their consequences
27
1. Definitions
APM
Auto-Programming-Mode
EMK
Electromotive force
AR
Autorotation/Bail-out
BEC
Battery Eliminating Circuit to power
the receiver from the main battery)
KOSMIK KOSMIK ESC
Button
control knob for mode programming
LED
Active light / control
Mode
Operating mode / program
Parameter variable value
Pitch
Blade angle (rotor blade) top side
see picture in section 5 bottom see
picture in section 5
KONTRONIK programming unit
1.1 Delivery content
1. 1 x KOSMIK ESC
2. 1 x 200 A electric fuse
(Including fixation)
3. 2 x BEC cable
4. 1 x Telemetry cable with JR connector
(only for COOL KOSMIK 250 HV)
5. 1 x Telemetry cable with mini JST connector
(only for COOL KOSMIK 250 HV)
6. 1 set battery cables
(2 pieces - red / black) one sided with wire-
terminals wired, stripped and tinned on the
7. 1 set motor cables
(3 pieces - yellow) one sided with wire-
terminals wired, stripped and tinned on the
other side
8. 5 x screw (M5 x 10 mm)
9. 5 x self-retaining nut (M5)
10. 10 x washer (M5)
11. 5 x shrinking tube
12. 1 x screws for COOLING fan
(only for COOL versions)
13. 1x COOLING fan
(only for COOL versions)
2. Safety instructions
KOSMIK is a product that is designed
exclusively for RC-model operation. Under
no circumstances should the KOSMIK be
used in manned applications!
Always ensure sufficient cooling in order to
prevent overheating of the ESC.
If
necessary, a heatsink is to be mounted to
the KOSMIK’s top side!
• For safety reasons, the KOSMIK is always to
be operated with a properly sized fuse within
the battery circuit. A corresponding 200 A fuse
is included with your KOSMIK.
!
!
