MSH8900
www.symkloud.com
// 43
3.2.7.
Configuring and Viewing Information about Switch Ports
To enable or disable ports and uplinks and to configure port and uplink status, speed, flow control, MTU and other
advanced features:
Switch Web UI
Switch CLI (serial, SSH, SOL)
Configuration > Ports
Proceed with configuration
Click Save
# config terminal
(config)# interface
<*|Ethernet> <switch
No.|switch group>
/
<port|port group>
(config-if)# ?
A list of possible configuration commands
appears
Proceed with configuration
Notes
This operation must be done for all the switches in
the stack.
A single command line can involve one or
multiple switches and one or multiple ports.
Standard range writing conventions apply.
Examples:
(config)# interface Ethernet 1,2/3-9
This command involves switches 1 and 2 and
ports 3 to 9.
(config)# interface Ethernet */1-2
This command involves all switches within the
stack and ports 1 and 2.
Summary of Contents for MSH8900
Page 1: ... USER GUIDE MSH8900 ...
Page 12: ...MSH8900 www symkloud com 12 1 2 Block Diagram Figure 5 Block diagram of an MS2900 ...
Page 14: ...MSH8900 www symkloud com 14 Figure 7 Port mapping of an MS2900 platform ...
Page 16: ...MSH8900 www symkloud com 16 Figure 8 Port mapping in MS1300 platforms ...
