MSH8900
www.symkloud.com
// 27
Figure 13: Default IP addresses of an MS1300 platform
Hub IOL IP
The IOL IP of a hub (Figure 12 and Figure 13) is the address of its ShMC. This IP is required to access the ShMC and the
System Monitor. To access the System Monitor, the IP of hub 1 or of hub 2 can be used.
Switch management IP
The switches of MS platforms have a switch management IP. This IP is required to remotely access the switch web UI
(SMBStaX) and the switch CLI via SSH. In dual hub platforms (MS2900), switches are stacked together to act as a
single switch.
Default switch management IP of a platform using SMBStaX network operating system with one switch
(MS1300) or stacked switches (MS2900): 192.168.10x.10 (where x is the chassis ID - default value: 1)
MSP node IOL IP
The BMC IP address of any MSP node is the address of FRU0. For more information on MSP node architecture, refer to
the documentation of the specific MSP node used on Symkloud.com.
Multiplexing on the serial interface of the hubs
The serial interface of the hubs includes a multiplexing functionality that can establish a link with each component
through a series of hotkeys (Figure 14 and Figure 15). This is only true when using the physical serial port on the hub
with the active ShMC (hub power LED must be continuously green).
The console port of MSH8900 ShMC can only be reached via the physical serial port connector on the respective hub.
Summary of Contents for MSH8900
Page 1: ... USER GUIDE MSH8900 ...
Page 12: ...MSH8900 www symkloud com 12 1 2 Block Diagram Figure 5 Block diagram of an MS2900 ...
Page 14: ...MSH8900 www symkloud com 14 Figure 7 Port mapping of an MS2900 platform ...
Page 16: ...MSH8900 www symkloud com 16 Figure 8 Port mapping in MS1300 platforms ...
