MSH8900
www.symkloud.com
// 42
3.2.5.
Configuring Switch Date and Time
Switch date and time must be configured using the NTP, as the default system date and time is not populated in the
switch. To configure the switch date and time:
Switch Web UI
Switch CLI (serial, SSH, SOL)
Configuration > System > NTP
Select Enabled
Enter the server IP or server host name
Click Save
# config terminal
(config)# ntp
(config)# ntp server
<Server No. (1-5)>
ip-
address
<ip address>|<host name>
Notes
To enter a server host name, DNS service must be
configured.
3.2.6.
Viewing Switch Configuration Information
To view switch configuration information:
Switch Web UI
Switch CLI (serial, SSH, SOL)
To display the different settings of the switch, browse
through the different configuration menus:
Configuration>System
Configuration>Ports
Configuration>VLANs
To display the current configuration:
# show running-config
To display the current configuration, including the
built-in defaults:
# show running-config all-defaults
To display the complete current configuration of a
specific port:
# show running-config interface Ethernet 1/3
Summary of Contents for MSH8900
Page 1: ... USER GUIDE MSH8900 ...
Page 12: ...MSH8900 www symkloud com 12 1 2 Block Diagram Figure 5 Block diagram of an MS2900 ...
Page 14: ...MSH8900 www symkloud com 14 Figure 7 Port mapping of an MS2900 platform ...
Page 16: ...MSH8900 www symkloud com 16 Figure 8 Port mapping in MS1300 platforms ...
