MSH8900
www.symkloud.com
// 40
3.2.
Configuring Switches
3.2.1.
Log in to the Switch CLI
Log in using the default credentials user: admin and password: admin.
COMMAND
PURPOSE
MSH8900 Login:
Ctrl+g -
Username:
admin
Password:
admin
#
Use HOTKEY to redirect serial console multiplexer
to the switch CLI.
The # prompt means the switch CLI was reached.
To access the switch CLI using the Ctrl+g command (Figure 14 or Figure 15):
1.
2.
Release both keys
3.
- key and release it
4.
Press the Enter key and release it
Hint: It is preferable to use the Ctrl key located on the left of the keyboard.
+
3.2.2.
Configuring Switch Management Interfaces
3.2.2.1.
Configuring the switch management IP Address
To assign an IP address to an existing VLAN:
Switch Web UI
Switch CLI (serial [preferred], SSH, SOL)
Configuration > System > IP
Click Add Interface
Proceed with configuration
Click Save (the session will be interrupted)
Access the Switch Web UI using the new IP
# configure terminal
(config)# interface vlan
<VLAN number>
(config-if-vlan)#
For a static IP address, use:
(config-if-vlan)# ip address
<ip address>
<netmask>
For a DHCP address, use:
(config-if-vlan)# ip address dhcp
Summary of Contents for MSH8900
Page 1: ... USER GUIDE MSH8900 ...
Page 12: ...MSH8900 www symkloud com 12 1 2 Block Diagram Figure 5 Block diagram of an MS2900 ...
Page 14: ...MSH8900 www symkloud com 14 Figure 7 Port mapping of an MS2900 platform ...
Page 16: ...MSH8900 www symkloud com 16 Figure 8 Port mapping in MS1300 platforms ...
