Introduction
AM4011
Page 1 - 8
ID 1022-1626, Rev. 1.0
P R E L I M I N A R Y
1.4.2
Front Panel
Figure 1-2:
AM4011 Front Panel Versions
3
2
1
0
0
1
2
3
AM4011
GbE D
GbE C
0
1
2
3
AM4011
GbE D
GbE C
Mid-size
Full-size
Module Management LEDs
• LED1 (red):
Out-of-Service LED
• LED2 (red/green/amber): Health LED
• HS LED (blue):
The hot swap indicator provides basic feedback to the
user on the hot swap state of the module. The HS LED
states are
off
,
short blink
,
long blink
, and
on
.
User-Specific LEDs
• ULED3 (red/green):
AMC Eth. port A link signal status or BIOS POST code LED
• ULED2 (red/green):
Front Eth. port C link signal status or BIOS POST code LED
• ULED1 (red/green):
Front Eth. port D link signal status or BIOS POST code LED
• ULED0 (red/green):
AMC Eth. port B link signal status or BIOS POST code LED
Connectors
• Serial Connector
• Gigabit Ethernet Connector
• USB Connector
For further information on the LEDs used on the AM4011, refer to section 2.3.1, “Front Panel
LEDs”.