Könner & Söhnen KS 7HP-1050G, Manual

Page: 36 / 39

35
12. STORAGE
Before placing the tiller in storage, carefully inspect the device for possible
malfunctions - the machine always has to be ready for operation. Keep the
device in a dry, dust-free place, out of the reach of children. The tiller should be
stored at a temperature of -20 to +40 °C. The tiller must be protected from direct
sunlight and precipitation.
If the tiller is to be placed in long-term storage (for example, during winter), the
following storage conditions must be observed:
- External engine parts, devices, cooling fins must be thoroughly cleaned from
soil.
- All moving parts of the tiller must be oiled or greased.
- The fuel tank and carburetor must be drained. To do this, work out fuel at idle
outdoors.
- Unscrew the spark plug and fill the engine with 3 cm
3
of oil.
13. WASTE
When disposing the product please keep in mind that the tiller packaging,
accessories and the device is made of suitable to the secondary use materials.
11. TRANSPORTATION
Before moving or transporting the tiller, make sure the ignition switch
ON / OFF valve and fuel are in the «OFF» (OFF). Set the tiller horizontally to avoid
fuel spillage. Steam of gasoline or spilled gasoline can cause fire or explosion!
For the convenience of transporting the tiller, use the packaging in which it is
sold. Fix the box to avoid overturning the tiller sideways during transportation.
Drain / run fuel before moving.
Use the transport wheels to move the tiller on-site from place to place. Be
careful – the tiller is heavy. Move carefully, do not put your feet under the tiller.
A collision with parts of the system of release or a touch of a hot
engine can provoke a strong burn or flash. Allow the engine to cool
completely before moving, transporting or storing the tiller.
! !
ATTENTION - DANGEROUS!