Könner & Söhnen KS 7HP-1050G, Manual, Page: 32 / 39

31
3. Remove four engine mounting bolts for work on regulation. Move engine
forward or backward the required belt tension and make sure that the external
surfaces of driving and driven pulleys are in the same plane.
CHANGING AND ADDING FUEL TO THE ENGINE
Follow the maintenance schedule and regularly check the oil level in the engine.
By reducing the oil level is necessary to add new oil to ensure proper operation of
the engine. To replace the oil, follow these steps:
1. Make sure that the tiller is placed on a flat surface.
2. Place the capacity to drain the oil under tiller engine.
3. Unscrew the drain cover, located under the hood oil probe, using allen key
10 mm.
4. Wait until the oil drains.
5. Replace the cover and tighten the drain.
FOLLOW THESE STEPS TO ADD OIL:
1. Make sure that the tiller is placed on a flat surface.
2. Remove the probe tap on the engine.
3. Pour the oil into the carter.
4. Level should be close to the maximum probe level.
Lower level
Upper level
Oil
filler cap
Fig. 26
Tension roller
Fig. 25