Introduction
9
9
Hook/V. Request key:
Press this key to open a
telephone line for manual dialing. You can hear the
dialing through your fax machine’s speaker.
If you have an optional telephone handset or external
telephone connected to your Konica Fax, you can also
use this key to initiate or answer a request for voice
communication during a fax communication. Press this
key while transmitting to signal the operator at the other
fax machine that you want to hold a conversation at
the end of your transmission or after reception of any
page has been completed. To answer a voice request,
press this key after lifting your telephone handset.
10
One Touch keypad: Each of the keys on this keypad
can be programmed with a fax number. You can dial
this number by pressing the corresponding key. See
page 11 for details. The keys are also used to control
and program fax functions.
11
One Touch labels:
After programming a location into a
One Touch key, write the location’s name on the One
Touch label. Lift off the plastic cover above the One
Touch label, use a pencil to write in the name, then
replace the cover.
12 Numeric keypad:
When dialing, these 12 keys work
just like the keypad on a telephone. Also, use the
keypad to enter numbers, letters and other characters
while programming functions or information. After
pressing the Search key, use the numeric keypad to
alphabetically search for the names of locations
programmed into your Konica Fax.
13
*/Tone key: If your Konica Fax is set to pulse
dialing, this key allows you to switch from pulse to
tone dialing during your current call. You can also
use this key while programming to create numbers
with mixed pulse-then-tone operation.
14 0/Unique key:
When dialing, use this key to enter a
zero. When programming your Sender ID or a
Location ID, you can use this key to enter a
variety of unique characters, including: ! # & ‘ ( ) *
+ , - . / : ; = ? · ä ß ñ ö ü Æ Å Ø æ å ø.
15 Transmit Resolution/Yes
3
key: After you load a
document, use this key to change the transmis-
sion resolution used. Use STD for standard
originals, FINE and EX.FINE for detailed or small
print originals, and PHOTO for originals that
include colors or many shades of gray.
Use this key also as the Yes
3
key when making
selections or to move your cursor to the left while
entering information.
16 Type of Original/No
4
key:
Use this key to select
the document contrast after you load a document
for transmission. Use LIGHT for originals that are
too light, NORMAL for documents with good
contrast, and DARK for originals that are too dark.
Use this key also as the No
4
key when making
selections or to move your cursor to the right while
entering information.
Summary of Contents for FAX 9820
Page 1: ...FAX 9820 User s Guide...
Page 9: ......
Page 15: ......
Page 19: ...Introduction 7 Control Panel...
