E-2
2. Installation space
(Unit: mm (inch))
bizhub C750i + FS-540SD + LU-205
615
(24-3/16)
781
(30-3/4)
467.5
(18-3/8)
875.5
(34-7/16)
322
(12-11/16)
774.5
(30-1/2)
2492.5 (98-1/8)
1343 (52-7/8)
1
5
6
0
.5
(6
1
-7
/1
6
)
1
2
0
7
(4
7
-1
/2
)
3
5
3
.5
(1
3
-1
5
/1
6
)
3. Pre-installation check items
(1) Select a level and stable place for installing the
machine.
(2) Be sure to use a power source of the voltage
and frequency indicated in the product specifi-
cations. Ensure that the current carrying ca-
pacity of the power outlet is at least equal to
the current listed in the product specifications.
(3) Power the machine directly from a dedicated
power outlet. (Do not use an extension cord.)
(4) Do not plug or unplug the power cord with wet
or dirty hands, otherwise you may get an elec-
tric shock.
(5) Avoid a hot and humid environment, or a place
exposed to direct sunlight.
(6) Avoid a dusty location, or a place near volatile
and flammable substances.
(7) Avoid a poorly ventilated place.
4. Notes on using touch panel
Be sure to instruct users on the following points.
• This machine uses a capacitive touch panel.
When you touch the touch panel, use your finger
or the stylus pen supplied with the machine.
If you touch the panel using your nail or a pen tip
instead of using your finger or the stylus pen, the
touch panel does not respond normally.
• Pressing the touch panel hard may cause dam-
age.
• Do not strongly press the panel or press it using
the sharp tip of mechanical pencils.
• The key is a finger tapping (quick light touch us-
ing a finger) operation.
Note:
If you proceed to install the Expanded Memory
Unit EM-908, install it before the setup of the main
body.
